The swimming pool has a high pH and fast adjustment method skills

The pH of the swimming pool referred to here is the pH of the water, which is mainly used to adjust the water quality balance. Over-acidity and alkalinity have an impact on the swimmers and the equipment and water quality in the swimming pool. More importantly, it will indirectly affect the duration of the chlorine disinfection effect. Therefore, we must manage this indicator well when maintaining the water quality of the swimming pool.

According to the sanitary standard for water quality in swimming places, the pH value should be between 7.0-7.8, lower or higher than Dutong - it is regarded as unqualified treatment. The limit value requirement for pH in the new national standard has been increased and the range has been reduced from the original level, which shows the importance of pH value.

So, when the pH of the swimming pool is high, how can we quickly adjust it to the standard range?

Yuncang has two kinds of pH regulators: pH plus and pH minus. When the pH of the pool water is high, we want to adjust it quickly. At this time, we need to use a pH reducing agent. It is a special water treatment agent, which is in the shape of white crystal particles, easy to use, and reduces by 1 0 ℃, add 10-15g per cubic meter of water.

Yuncang pH reducing agent can neutralize excessive hydroxide and carbonate, quickly reduce the pH of pool water and maintain it within the standard range.

When the pH of the pool water is less than 7.0, most of the disinfectants in the pool water exist in the form of hypochlorite (residual chlorine), while hypochlorite only accounts for a small part, that is to say, the activity of the disinfectants in the water is very high, and it is easy to see light decomposition and volatilization.

That is to say, a large part of the disinfectant you put in has been wasted, so your residual chlorine will soon be lower.

When the pH of pool water is more than 8.0, most of the disinfectants in the pool water exist in the form of hypochlorite, while hypochlorite (residual chlorine) only accounts for a small part, which will undoubtedly greatly reduce

The activity of disinfectant in water will affect the effect of algaecide and sterilization.

When the pH value of swimming pool water is maintained at 7.5, the disinfection effect is very good, and the residual chlorine can be maintained for a longer time.